All of our smartphones rely on lithium-ion batteries. Inside, this type of battery contains ionic cells and chemical compounds that degrade and corrode over time and with frequent use. As it ages, its efficiency and charging capacity decreases. Although all Android phones come with an instruction manual that explains how to use the battery and how it consumes energy, it does not contain any instructions or instructions that help educate the user on what to do to maintain its lifespan.
In most cases, these manuals do not contain anything mentioned about battery deterioration or how to check its physical condition.
In this short guide, we will provide you with a set of very important tips to help you preserve the life of your virtual smartphone batteries from wear and tear. And if you own a phone from Xiaomi, Redmi, Poco, Samsung, or any other smartphone, you might want to take a look at our report. How do you check the health of the battery, the number of charge cycles, and its remaining life?.
How to check the status of your phone battery?
Unlike the iPhone, which provides users with a direct way from within the settings to know the device’s battery status, all Android phones come with secret or hidden menus and codes and often can be accessed by connecting to a code common to all Android phones, or at least most of them.
Just call this number *#*#4636#*#* And you will get a comprehensive report that shows you the status and temperature of the battery. If the condition of the battery is good, you will find in this report its condition written in front of it “Good.
If it is in poor condition, you will find this value “Bad”, which means that you will have to change and replace the battery. As for the temperature, it is better to be in the range of 30 to 40 degrees Celsius.
If it is higher than this degree, it means that there is a problem with the battery or it is better to try turning off the phone so that it cools down for a while and then use it again.
You can also see: Activate a feature Call waiting on iPhones and make multiple calls.
The most important tips to protect the mobile battery from corrosion and deterioration
The life of a battery is determined at the factory by the number of charge cycles it can handle and then the battery will begin to wear out. Don’t worry, all Android batteries have a life span of 300 to 500 charge cycles. But in the end, battery condition deterioration is inevitable. You can only follow the following tips to preserve the life of your battery as much as possible..
- Do not attempt to charge or discharge the phone to extreme levels, i.e. do not charge the phone to 100% – just be satisfied with 80% to 90% – and do not try to use the phone until the charge reaches 0%
- Don’t rely on express shipping only when necessary
- Avoid using the phone while charging
- Do not expose the phone to high temperatures such as direct sunlight or leave it in the car drawer on very hot days
- Don’t rely on bad third party chargers – make sure you use a quality charger from the leading brands
- Avoid charging the phone at night, as it drains the battery
- Avoid using the phone when you feel the battery temperature is high
- Get rid of the apps that are running in the background after you are done with them because they always consume the battery and will make you have to recharge the battery every now and then
